Social Icons

Tuesday, November 29, 2011

VP Infinite Justice Gundam

Finally completed this kit.. Minimal decals used.
I used reflective stickers for the sensors on the head. Quite a nice effect imo.


Here's the paints/mixtures that I am using:
Body red: Fluorescent Pink + GX Hermann Red
Flight-pack red: GX Hermann Red + Cobalt Blue + Fluorescent Pink
Green: Clear Green on top of Star Bright Duralumin
White: White + a little Cobalt Blue
Black: 100% Black
Yellow: Orange Yellow
Inner Frame/Joints: Star Bright Duralumin

Click below for more pictures

Tuesday, November 22, 2011

[WIP] 1/100 VP Infinite Justice Part 3

Started painting. I had to check the net for some paint color references.
Luckily this time, masking tape did not pull off any primer/paint, unlike what happened when I was building the Neograde Strike Freedom.




Tuesday, November 15, 2011

GBWC 2011 - 天使再臨 (MG Exia Repair)


Here's my entry for the GBWC, actually built for the competition in September which got postponed. Also submitted another entry which is the HG Blu Duel / Verde Buster

First time doing a battle damage and first time doing a diorama. Some dry brushing done on the base but photos did not capture it well.


Some WIP pictures


Sunday, October 30, 2011

HG Blu Duel / Verde Buster Gundam

Finally done with this 2 kits! Might be sending in for upcoming competition..

Snap fitted


Completed kit


Thanks for looking! Comments and critiques welcomed!

Friday, October 21, 2011

[WIP] HG Blu Duel / Verde Buster

Done painting both kits, some areas need some touch up though. Panel lining next, then final flat coating.

Blu Duel's color used from the HG Duel Gundam Assault Shroud paint set.
Verde Buster color was custom mixed.


[WIP] HG Verde Buster Gundam Part 1

Some updates. I've decided to include the HG Verde Buster Gundam as well. I snap fitted this kit a few years back when it was just released, lots of sprue cut marks and seamlines.

I made some modifications to some areas:
- Lengthen head by a little bit
- Increased neck height
- Widen chest area
- Increased waist height
- Increased thighs height
- Changed to Strike Noir's feet
- Cut some parts for easy painting


Monday, October 3, 2011

[WIP] 1/100 VP Infinite Justice Part 2

Another update! I have finished priming the whole kit except for the beam rifle and the shield.
Problems revealed by the primer corrected as well.

Now it's ready for painting!!!


Thanks for looking!

[WIP] 1/100 VP Infinite Justice Part 1

Did not have much free time recently to update this blog as I was quite busy with work...
But managed to squeeze out time to do this kit every now and then.

I took a few hours to remove the nubs for a quick test fit. Fitting problems arms and feet resin parts. Big gap on the chest part. The 2 cannons on the backpack fitted loosely. Some surface defects on certain parts.


Thursday, September 22, 2011

[Review] 1/100 Infinite Justice Conversion

Here's a short review on Super-G recast VP Infinite Justice conversion. A MG Infinite Justice is required for the inner frame and flight pack. This conversion kit mainly concentrates on replacing the armour part pieces, not much changes to the flight pack except for the top 2 cannons.

Usual boxing from Super-G with a lousy out of focus photo pasted on the top.
Contents consist of:
- Plastic bag of parts, divided into multiple segments.
- 2 photo references of completed kit (Clear and sharp photos)
- 1 piece instruction manual
- Water-slide decal of stencils
- 1 small sheet of silver sticker (metal decal?)
- 2 metal beam sabres with clear beams


More details of this kit below

Saturday, September 17, 2011

[Review] 1/100 Sword Calamity Conversion Part 2

After some slicing and dicing, test-fitted onto MG Freedom inner frame.
I found the nubs were kind of large, quite a bit of care needed when cutting them. Fitting was quite good, most parts went onto the frame without much problem, except for a few areas:


- Arm piece might have shrunk during casting, cracked when inserted onto the frame. Insert pla-plates inside the crack to widen it.
- Connecting joints from backpack to the swords too weak. Sliced off pegs and strengthen with brass rod inside.
- Warped swords.


More cleaning up of the surface will be needed before I proceed on to priming. I foresee a sanding and masking nightmare ahead......
Overall, I would rate this kit 7.5/10 for the casting and ease of fitting.
Thanks for looking!

Thursday, September 8, 2011

[Review] 1/100 Sword Calamity Conversion Part 1

Here's a short open box review on the Neograde Sword Calamity Conversion kit recasted by Super-G. Bought it from Hong Kong during my trip there. This conversion kit uses MG Freedom as the base kit.

Boxing looks nice and sturdy, photos on the top and side weren't of the best quality, but it's the contents inside that matters.

Some background info about this Gundam. This conversion kit portrays the 2nd unit out of 3 units of Sword Calamity Gundams built. Piloted by Edward Harrelson of the Earth Alliance, which donned his markings of a rose and two swords that make a X on top of the rose on the left shoulder.

Wednesday, September 7, 2011

Hong Kong Trip

Just returned from holiday in Hong Kong. The hotel I was staying was right smack next to Mongkok where u can find most hobby shops and airsoft shops. Not a good piece of news for my wallet though...

My main motive for my trip there was get resin kits. Can't leave empty handed right? Gundam kits are insanely cheap as well.

Taking 1 SGD = 6.45079 HKD (from XE.com)
MG Strike Freedom - HKD338 - SGD52.40
MG 00 Raiser - HKD438 - SGD67.90
HG God Gundam - HKD100 - SGD15.50


























Resin kits:

FSS 1/100 Bang Doll
FSS 1/100 Luminous Mirage with Buster Launcher
FSS 1/100 Schpertor K.O.G.
Neograde 1/100 Sword Calamity Conversion (Super-G recast)
Neograde 1/100 Strike Gundam Evo 8 Conversion (Super-G recast)
Vicious Project 1/100 Strike Freedom Gundam Conversion (SMS recast)
Non-scale Omegamon-X (YM Studio recast)

Thursday, September 1, 2011

[WIP] HG Blu Duel Gundam Part 2

Some updates for this kit.. Quite a bit of work done to it in the pass few days.
My 2 boxes of HG Strike Noir arrived, only to have the thigh and feet parts stolen for this kit lol


Primed kit shown above, more details below

Monday, August 29, 2011

Celestial Being - Gundam Meisters

Ok, I admit the title doesn't seems appropriate. Gundam Meisters refer to the pilots. LOL
Well, instead of the pilots, I have their Gundams!!! So this post deserves larger pictures


HG Seravee Gundam

And FINALLY!! I have completed the final one!

This one was straight OOB, scribed some extra panel lines on some areas.
Not easy filling the seams on Seraphim. Seam lines running through whole halves of the parts.
I couldn't get an exact color match for the green for the chest, but the color I mixed out turned out quite nice.

HG Cherudim Gundam

3rd Celestial Being Gundam completed! HG 1/144 Cherudim Gundam

Not much modifications done, except a neck extension by 1mm. Original head was too low.
Decals went on nicely this time    d(^^)b